Weld Penetration Analysis SoftwareModel:QS-WPAS 5.0SPECIFICATIONS:
|Provide Installation Service
QS-WPAS software is a powerful easy-to-use tool that enhances your ability to quickly and efficiently handle your most critical welding measurementand documentation software needs. Your workflow and productivity are greatly improved. QS-WPAS
has been designed with your welding cross-section measurement needs in mind. QS-WPAS's measurement module allows you to quickly measure items such as your fillet welds, throat, leg lengths and penetration. Use QS-WPAS Measurement Tolerance indicator to improve performance by having the software automatically tell you if a measurement is out of the tolerance range.
The following report concerns the analysis of a fillet weld, a weld of approximately triangular cross section joining two surfaces of approximately right angles to each other. Important measurement made by the distance from the root if the fillet to the center of the face (orthroat), the distance from the root of the joint to the junction between the exposed surface of the weld and the base metal (or leg), the angles and the root
Measurements that could have been done with the same ease or similar sample are among others: depth of HAZ (heat affected zone), area of HAZ, joint penetration, phase counting, etc.
The measurement remain unaffected if the image is zoomed for better accuracy. The magnifiertool is also available which can be switched on any part of image. The tool zooms only the region surrounding the cursor allowing to increase the drawing precision while still seeing the whole sample. Image analysis system can measure a sequence of specific characteristics or welded parts. The system brings the good tool with the good color when it's the time for the operator to use it.